Part Number Hot Search : 
A25HB HY5PS1G PHFM103 LQ0B152 DM106 75K10 HZ36B3 SX048
Product Description
Full Text Search
 

To Download BCR410W07 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 BCR410W
Active Bias Controller Characteristics * Supplies stable bias current from 1.8V operating voltage on * Low voltage drop: 110mV for 10mA collector currrent Application notes * Stabilizing bias current of NPN transistors and FET's from 100A to 20mA
+ = V re f 4 S ense 3 Io u t
3 4 1
2
* Ideal supplement for Sieget and other transistors
1
Vs
2
GND
* Pb-free (RoHS compliant) package 1) * Qualified according AEC Q101
Type BCR410W
Maximum Ratings Parameter Supply voltage Output current
Marking W8s 1= Vs
Pin Configuration 2=GND 3=Iout 4=Sense
Package SOT343
Unit V mA mW C
Symbol VS Iout Ptot Tj Tstg
RthJS
Value 18 0.5 100 150 -65 ... 150
Total power dissipation, T S = 110 C Junction temperature Storage temperature Thermal Resistance Junction - soldering point2)
470
K/W
1Pb-containing package may be available upon special request 2For calculation of R please refer to Application Note Thermal Resistance
thJA
1
2007-05-29
BCR410W
Electrical Characteristics at TA = 25C, unless otherwise specified Symbol Values Parameter min. DC Characteristics Additional current consumption VS = 3 V I0 200 400 typ. max.
Unit
A
DC Characteristics with stabilized NPN-Transistors Lowest sufficient battery voltage Voltage drop IC = 10 mA Change of IC versus hFE hFE = 50 Change of IC versus VS VS = 3 V Change of IC versus TA IC/IC IC/IC IC/IC tbd 2 0.15 h FE / h FE
VSmin Vdrop
-
1.8 110
-
V mV
%/V %/K
2
2007-05-29
BCR410W
Collector Current IC = f (VS) of stabilized NPN Transistor Parameter Rext. ()
10 2 300
mV mA
Voltage drop Vdrop = f (I C)
240
15 Ohm 22 Ohm 47 Ohm 100 Ohm
Vdrop
5.5
10 1
Ic
10 Ohm
220 200 180 160 140
10 0
120 100 80
220 Ohm 470 Ohm 1000 Ohm
60 40 20
10 -1 2.0
2.5
3.0
3.5
4.0
4.5
V Vs
0 -1 10
10
0
10
1
mA
10
2
IC
Collector current I C = f (Rext.) of stabilized NPN Transistor
10 2
Total power dissipation Ptot = f (TS)
120
mA
mW
Ic
Ptot
2 3
10 1
80
60
10 0
40
20
10 -1 1 10
10
10
Ohm 10 4 Rext
0 0
20
40
60
80
100
120 C
150
TS
3
2007-05-29
BCR410W
Application Circuit:
Vs BC R 410W
R ext
= +
V re f
Lc
Rb R Fout
R F in
R F T r a n s is to r
4
2007-05-29
Package SOT343
BCR410W
Package Outline
2 0.2 1.3 4 3 0.15 1 0.3 +0.1 -0.05 4x 0.1
M +0.1 0.6 -0.05
0.9 0.1 0.1 MAX. 0.1 A
1.25 0.1 2.1 0.1
2
0.1 MIN.
0.15 -0.05 0.2
M
+0.1
A
Foot Print
0.6
0.8
1.15 0.9
Marking Layout (Example)
Manufacturer
1.6
2005, June Date code (YM)
Pin 1
BGA420 Type code
Standard Packing
Reel o180 mm = 3.000 Pieces/Reel Reel o330 mm = 10.000 Pieces/Reel
4 0.2
Pin 1
2.15
2.3
8
1.1
5
2007-05-29
BCR410W
Published by Infineon Technologies AG 81726 Munchen, Germany (c) Infineon Technologies AG 2007. All Rights Reserved.
Attention please! The information given in this data sheet shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
6
2007-05-29


▲Up To Search▲   

 
Price & Availability of BCR410W07

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X